Uncategorized

Quick note

Uncategorized

It’s definitely Spring here. I have a Mexican Plum in front that is COMPLETELY covered in blooms.

They really aren’t any good to eat, sadly, but I think the birds like them.

I’ve finished carving the final, I hope, block for the rockpile print. It’s not quite done in this shot. Chisels are 1mm and 3mm, for scale.

More test printing soon, then hopefully can start printing in earnest this weekend! Stay tuned.

New shade blocks

Uncategorized

When I started working on the rockpile project, I wasn’t sure where the color would go, what blocks I would need, and so on. I drew and carved the key block, then thought about where the lightest colors would go and carved some color blocks for those, using transfer sheets printed from the key block to locate their edges. I started test-printing in earnest earlier this month, when I had blocks for light grayish, light bluish, green and reddish. First I tested some of the colors I though would be good to use, to see how they overlap and combine to make other hues. I kept notes and spots of color to document the saturation of the pigment I used to print.

After the initial testing, the results of which I showed in the last post, I decided to add some darker shading in some areas. Here are my transfer sheets:

Notice there is a thinner paper of the gampi type laminated on a thicker backing sheet. The lines were printed from the key block, then I marked and colored in the areas of the new blocks that are to remain. The blue is for water and sky shading; the yellow is to darken some areas of the rock, and the pink is for some even darker shadows on the rocks.

These transfer sheets get pasted UPSIDE DOWN on the new blocks using the same registration marks I’ll later use for printing, the thicker backing paper gets peeled off, and often part of the gampi gets peeled off along with it, leaving the face of the gampi with the lines and colors against the wood and visible through what’s left of the gampi. If it is still too thick, I can moisten it a little on one edge, and peel off another layer.

This block is one I’ve already test-printed from, but shows what the transferred gampi looks like after it’s pasted down and the excess is peeled off. It’s super-easy to see what to carve!

Here are my newest blocks after some test printing, and the two surviving test prints with their new shading.

I think it is starting to come together! I think I need a little more color on the trees on top of the hill, and more definition of the cliff face. I’ll see what I can do with my current blocks (there are 7!), but I might need to do more carving.

Rockpile progress

Uncategorized

I’ve added another color, burnt sienna, to the two surviving test prints (there were three, but I made the boneheaded move of printing one upside down, of course) . Also the test on top has a bit of a turquoise bokashi that deserves its own block on the sky and water. I might have registration problems with the green; that is too be seen.

Next, I printed the key block lines in a light sumi on test #2.

Many of these lines are way too heavy, but this will let me see which I can trim down, which I can eliminate completely, and where I truly have registration issues. Progress!

Overdue update!

Uncategorized

It’s been awhile. I finished the Fall print, but not soon enough to send as a Fall card. We have a brand new year. And, I have made significant progress on a new print!

I finished carving the initial key block some time ago. There are lots of lines; it took awhile! Here is is before and after I cleaned off the transfer paper.

My hope for this print is that I can move in the direction of the subtlety and detail of some of the shin-hanga prints. This is an open question at this point! I think it is possible that many of the lines of this block may get replaced later by lines on other blocks, and so be carved away. (This is called “mudabori”, or “wasted carving.”)

Here’s an early test print showing the key block lines and a light shading block, printed using neutral tint.

Today I started trying out colors! I’m printing without the key block lines at first, to see which areas work well without them.

One more test print adding some green:

I have one more already-carved block that will add a reddish-brown color. Then I will think about what other blocks are needed, what needs to be trimmed, etc. This one will be long in the making, but I think it will be worth it!

New Fall print progress

Uncategorized

After first learning how to make prints with water-based pigments from Annie Bissett (https://anniebissett.com/home.html) in 2017, I went home and made a tiny (~ 2″ x 3″) little print using plywood samples I had received from various sources, and testing out about 5 different paper types. Most of these ended up being sent out to friends and family as Fall greetings.

I decided this year to make another Fall-themed print, which I started working on back in June, when I first made the “frankenblocks” from thin cherry and plywood plus applied chunks of wood for registration marks. Sadly, the set of prints is not going to be ready for the official start of Fall, since other things got in the way. The new goal is to have the first printing ready sometime during Fall. Here’s the key block and my first attempt at making hanshita for the color block transfers:

As you can see from the bleeding and the wrinkling, I used WAY too much liquid to print the hanshita. Try 2 turned out OK! When I used the glue I brought back from Japan (the stuff Dave uses to attach line-work transfers), most of the gampi peeled off with the mounting paper.

The transfer above was for the yellow color, which will cover the leaves entirely. Here are some shots of the carved areas for blue and light orange-ish:

And finally, here are the finished color blocks – 6 of them – cleaned off, before any pigment has been applied (yellow, red; light reddish, blue; dark green, and light green).

I will confess, I have done a small round of test printing! The results of that will need to wait until the next post.

“By Starlight” printing complete

Uncategorized

I finished the batch of boatmen! They are already at Mokuhankan in Tokyo, also available online here: https://mokuhankan.com/catalogue/KP02.php.

Here are my printing notes.

  1. Maimeri Blu Primary yellow: boat, lamp and sky bokashi. Block 1.
  2. 3-way bokashi on the water (live dangerously!): Primary yellow, Holbein Opera, Holbein Prussian Blue. Used a big shoe brush. Sheds like a dog, but it’s a good way to get a big brush on the cheap. Block 2.
  3. Holbein Opera bokashi on the sky, rim of the boat. Block 1.
  4. Grumbacher Academy Payne’s Gray, round bokashi on water. Block 3. This one has the water sparkles cut out. Used the big shoe brush again; brush marks visible on most copies.
  5. Grumbacher Payne’s gray: sky bokashi. Block 4. This one has the clouds cut out.
  6. Grumbacher Payne’s gray on Block 5, which has the boat interior, the shade of the boat, the man, and the hills and their reflection.
  7. Windsor Newton Indanthrene Blue: Block 3 (water sparkles)
  8. Indanthrene bokashi on Block 4 (sky)
  9. GB Payne’s Gray, round bokashi on water. Block 3 (water sparkles). This time I used two brushes rather than the big shoe brush, to try to smooth out the brush marks.
  10. GB Payne’s Gray on Block 6. This one has the darkest shadows on the water, the shaded side of the boat with its gear and pilot, and the above-water parts of the hills. I omitted the hills.
  11. GB Payne’s Gray roundish bokashi on the sky, block 4. Small hill was omitted.
  12. GB Payne’s Gray bokashi on the small hill, block 4.
  13. GB Payne’s Gray bokashi on the tall hills and their reflection (block 5)
  14. GB Payne’s Gray again on block 6, darker in the corner (omitted hills).

I am hereby appointed the ambassador for Grumbacher Academy Payne’s Gray 🙂

I took only a couple of process shots. The first is after impression 3, and the second is after impression 4.

If I were to carve these blocks again, I would try to think of a way to avoid the hard line at the horizon. It’s not just a matter of merging blocks 1 and 2, because the strong yellow on the rim of the boat and the lamp and its reflection need to be independent of the water blocks. But probably dividing responsibilities among the blocks differently could yield a more harmonious horizon.