New Fall print progress


After first learning how to make prints with water-based pigments from Annie Bissett ( in 2017, I went home and made a tiny (~ 2″ x 3″) little print using plywood samples I had received from various sources, and testing out about 5 different paper types. Most of these ended up being sent out to friends and family as Fall greetings.

I decided this year to make another Fall-themed print, which I started working on back in June, when I first made the “frankenblocks” from thin cherry and plywood plus applied chunks of wood for registration marks. Sadly, the set of prints is not going to be ready for the official start of Fall, since other things got in the way. The new goal is to have the first printing ready sometime during Fall. Here’s the key block and my first attempt at making hanshita for the color block transfers:

As you can see from the bleeding and the wrinkling, I used WAY too much liquid to print the hanshita. Try 2 turned out OK! When I used the glue I brought back from Japan (the stuff Dave uses to attach line-work transfers), most of the gampi peeled off with the mounting paper.

The transfer above was for the yellow color, which will cover the leaves entirely. Here are some shots of the carved areas for blue and light orange-ish:

And finally, here are the finished color blocks – 6 of them – cleaned off, before any pigment has been applied (yellow, red; light reddish, blue; dark green, and light green).

I will confess, I have done a small round of test printing! The results of that will need to wait until the next post.