Another block

Another block? What’s going on?

Nope, not adding a block to the forest rays print! The truth is, I just don’t have the time to start printing that one. I need several continuous days without many other responsibilities; I think I will need to take vacation to do the printing. Carving, however, is something I can spend a couple of hours on here and there. Plus I really love carving! So, motivated by that excitement and a new design idea, I’ve prepared another block. I’ve used a card scraper to smooth the surface – it yields the same kind of surface that can be achieved with a hand plane, but is a lot less expensive and requires less skill to use.

Since the last design was so complicated, for this one, I am aiming for simple simple simple. All the impressions will fit on ONE piece of wood (with two laminated cherry faces). I’m thinking monochrome too!

I got everything ready before starting the carving. I figured out the final size, cut the paper, and planned out where on the wood each impression will go.

A few of the sheets of washi have some flaws. One has a tiny blood stain because I trimmed off the very tip of my thumb cutting them 😦 and others had some bends in the paper. I’ll print them all – the sheets with slight bends might turn out fine after being dampened and printed. The sheets with (possible) flaws got a little line as a corner mark; the others got a dot on the corner that is the squarest, which will go into the corner kento when it’s time to print. 50 sheets in all! My biggest print run yet.

Now to paste down that hanshita and take a knife to the block!

It’s showtime!

I’m very happy to have been selected by the kind folks at PrintAustin to participate this year in PrintExpo! Normally PrintExpo is an in-person affair held in a large hall where printmakers and printing collectives set up booths to show their work over a weekend, including an evening gala with adult beverages and the like. This year of course we can’t do that, so it’s going virtual. There will be a virtual conference on February 6, 2021, with more details to come about registration and content.

In conjunction with PrintExpo, I am working on a video demonstrating most of the steps in producing a print. I started recording content a few days ago! Here’s one setup:

The phone makes pretty decent video, including audio that is clear without too much background noise and hiss. Watching myself on video shows me just how slowly I speak and how infrequently the words come out when I am thinking about something! Unfortunately I’m showing steps that aren’t reversible, so I can’t just do another take. I hope I’m able to edit the clips into a form that won’t drive viewers mad 😉

The video demo will start with making the blocks themselves from parts. This will be a pretty large print, the largest I have made using cherry blocks yet. The blocks are about 8″ x 10″. I used 1/4″ American Black Cherry thin lumber laminated to 1/2″ birch plywood with waterproof wood glue, then I used scrapers to get the surface of each block into shape.

block parts
3 blocks clamped
scraping
pretty smooth!

I’ve made 4 blocks, each double-sided, so I’ve got one for the key block and up to 7 color blocks. If that turns out to be too few, I can make more, or just use shina ply if the color designs are uncomplicated.